ATI IDEAL-PCI IDE Hard Disk/Floppy Controller Settings and Configuration

Data bus:	32-bit PCI
Size:	Half-length, full-height card
Hard drive supported:	Four IDE(AT) and EIDE drives
Floppy drives supported:	None

CONNECTIONS
Function	Location
40-pin primary IDE(AT) connector	CN1
40-pin secondary EIDE(AT) connector	CN2
4-pin connector - drive active LED	CN3

IDE INTERFACE ADDRESS SELECTION
Primary IDE Address		Secondary IDE Address	JP1	JP2
»	1FXh	17Xh	pins 1 & 2 closed	pins 2 & 3 closed
	1FXh	reserved	pins 1 & 2 closed	pins 1 & 2 closed
	17Xh	Disabled	pins 2 & 3 closed	pins 2 & 3 closed
	Disabled	Disabled	pins 2 & 3 closed	pins 1 & 2 closed

PCI INTERRUPT SELECTION FOR PRIMARY IDE
INT		JP6/pins 1 & 2	JP7/pins 1 & 2	JP8/pins 1 & 2	JP9/pins 1 & 2
»	A	closed	open	open	open
	B	open	closed	open	open
	C	open	open	closed	open
	D	open	open	open	closed

PCI INTERRUPT SELECTION FOR SECONDARY IDE
INT	JP6/pins 2 & 3	JP7/pins 2 & 3	JP8/pins 2 & 3	JP9/pins 2 & 3
A	closed	open	open	open
B	open	closed	open	open
C	open	open	closed	open
D	open	open	open	closed