This article is from the Darkroom
Work FAQ, by Cees de Groot
Did you check the manufacturer information? I don't mean the stuff printed on the inside of the box, but the full information readily available on the web or even as hardcopy? When starting with a new film/developer combination, make sure that you get and read the manufacturer datasheets of both developer and film first - most of the manufacturers have datasheets available on the Web:
o Kodak <http://www.kodak.com/ciHome/products/L1/>, or call 1-800-242-2424 ext. 19 if you are in the US;
o Agfa <http://www.agfaphoto.com/products/index.html>;
o Ilford <http://www.ilford.com/html/us_english/homeng.html>;
o Fuji <http://www.fujifilm.com/>.
Then, there is an incredible amount of information about processing film on the web maintained by individuals. A (very) short list:
o Photo Source <http://www.digitaltruth.com/>, with the Massive B&W Dev Chart, a gigantic list of development times for a lot of film/developer combinations.
and of course: Use The Link, Luke.
 
Continue to: