FASTLINK/TX Network Card Settings and Configuration
LANTECH COMPUTER COMPANY
FASTLINK/TX
Card Type | Network Interface Card |
NIC Type | Ethernet |
Boot ROM | Available |
Network Transfer Rate | 10Mbps/100Mbps (half-duplex), 20Mbps/200Mbps (full-duplex) |
Topology | Star |
Wiring Type | Unshielded twisted pair |
Data Bus | 32-bit PCI |
CONNECTIONS | |
Function | Label |
RJ-45 UTP connector | CN1 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LINK | Green | On | Network connection is good |
LINK | Green | Off | Network connection is broken |
100M | Green | On | NIC connected to 100Mbps port |
100M | Green | Off | NIC not connected to 100Mbps port |
FDX | Red | On | NIC operating in full-duplex mode |
FDX | Red | Off | NIC not operating in full-duplex mode |
ACT | Red | Blinking | Data is being transmitted/received |
ACT | Red | Off | Data is not being transmitted/received |
My Books
