FASTLINK/FX (ST) Network Card Settings and Configuration
LANTECH COMPUTER COMPANY
FASTLINK/FX (ST)
Card Type | Network Interface Card |
NIC Type | Ethernet |
Boot ROM | Available |
Network Transfer Rate | 100Mbps |
Topology | Star |
Wiring Type | Fiber optic cable |
Data Bus | 32-bit PCI |
CONNECTIONS | |||
Function | Label | Function | Label |
Fiber optic connector (ST) - transmit | CN1 | Fiber optic connector (ST) - receive | CN2 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LINK | Green | On | Network connection is good |
LINK | Green | Off | Network connection is broken |
FULL | Red | On | NIC operating in full-duplex mode |
FULL | Red | Off | NIC not operating in full-duplex mode |
ACT | Red | Blinking | Data is being transmitted/received |
ACT | Red | Off | Data is not being transmitted/received |
COL | Red | Blinking | A collision condition has occurred |
COL | Red | Off | No collision has been detected |
My Books
