FE-1400TX Network Card Settings and Configuration
ACCULAN CORPORATION
FE-1400TX
NIC Type | Ethernet |
Network Transfer Rate | 10/100Mbps |
Data Bus | 32-bit PCI |
Topology | Star |
Wiring Type | Unshielded twisted pair |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
Unshielded twisted pair (100Base-TX) | CN1 | Unshielded twisted pair (10Base-T) | CN2 |
INTERRUPT SELECTION | ||||
IRQ | JP2/A | JP2/B | JP2/C | JP2/D |
A | Closed | Open | Open | Open |
B | Open | Closed | Open | Open |
C | Open | Open | Closed | Open |
D | Open | Open | Open | Closed |
Note: The location of JP2 is unidentified. | ||||
DIAGNOSTIC LED(S) | ||
LED | Status | Condition |
LED1 | Blinking | Data is being transmitted/ received on 100Base-TX |
LED1 | Off | Data is not being transmitted/ received on 100Base-TX |
LED2 | On | Network connection is good on 100Base-TX |
LED2 | Off | Network connection is broken on 100Base-TX |
LED3 | Blinking | Data is being transmitted/ received on 10Base-T |
LED3 | Off | Data is not being transmitted/ received on 10Base-T |
LED4 | On | Network connection is good on 10Base-T |
LED4 | Off | Network connection is broken on 10Base-T |
My Books
