WANGDAT 3100DX, WANGDAT 3400DX Tape drive card Settings and Configuration

Device Type	Internal Tape Drive
Interface	SCSI
Format	DDS DDS-2 (WANGDAT 3400DX)
Sustained Transfer Rate	Unidentified
Size	3.5 in. half height 5.25 in. half height (with bezel)
View	Top

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Compression enabled (3400DX only)	JP1/Pins 7 & 8	Closed
	Compression disabled (3400DX only)	JP1/Pins 7 & 8	Open
»	Termination enabled	JP1/Pins 9 & 10	Closed
	Termination disabled	JP1/Pins 9 & 10	Open
»	Factory configured - do not alter	SW1/1	On
»	Parity check enabled	SW1/2	On
	Parity check disabled	SW1/2	Off
»	SCSI 2 mode enable	SW1/3	On
	SCSI 1 mode enabled	SW1/3	Off
»	Allow insertion and removal of Tapes by command or eject button	SW1/4	On
	Prevent insertion and removal of Tapes by command or eject button	SW1/4	Off
»	Factory configured - do not alter	SW1/5	On
»	Factory configured - do not alter	SW1/6	On
»	Factory configured - do not alter	SW1/7	On
»	Factory configured - do not alter	SW1/8	On

DRIVE SELECT ID
Drive ID		JP1/Pins 1 & 2	JP1/Pins 3 & 4	JP1/Pins 5 & 6
	0	Open	Open	Open
»	1	Closed	Open	Open
	2	Open	Closed	Open
	3	Closed	Closed	Open
	4	Open	Open	Closed
	5	Closed	Open	Closed
	6	Open	Closed	Closed
	7	Closed	Closed	Closed

MANUFACTURERS RECOMMENDED MEDIA
Drive	Tape	Capacity Without Compression	Capacity With Compression
3100DX	60 meter DDS	1.3 GB	N/A
3100DX	90 meter DDS	2.0 GB	N/A
3400DX	60 meter DDS	1.3 GB	2.6 GB
3400DX	90 meter DDS	2.0 GB	4.0 GB
3400DX	120 meter DDS	4.0 GB	8.0 GB

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Unidentified	On	Drive activity on SCSI bus
LED1	Unidentified	Off	No drive activity on SCSI bus
LED1	Unidentified	Blinking	Drive moving tape
LED2	Unidentified	On	Tape cartridge in drive
LED2	Unidentified	Off	No tape cartridge in drive
LED2	Unidentified	Blinking	Tape cartridge loading or unloading
LED3	Unidentified	On	Cleaning required
LED3	Unidentified	Off	Drive O.K. - no cleaning required