CP 1000SE Tape drive card Settings and Configuration

Device Type	Tape Drive
Interface	SCSI-2
Format	QIC-24 (read) QIC-120, QIC-150, QIC-525, QIC-1000 (read/write)
Sustained Transfer Rate	113/240KBPS
Size	5.25 in. half height
View	Bottom

CONNECTIONS
Function	Label
Ground connector	CN1

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter.	J1	Unidentified
»	Factory configured - do not alter.	J4	Unidentified
»	Factory configured - do not alter.	J5	Unidentified
»	Factory configured - do not alter.	JPS	Unidentified
»	Parity enabled (odd)	JP1/Pins 7 & 8	Open
	Parity disabled	JP1/Pins 7 & 8	Closed

DRIVE SELECT ID
Drive ID		JP1/Pins 1 & 2	JP1/Pins 3 & 4	JP1/Pins 5 & 6
»	0	Closed	Closed	Closed
	1	Open	Closed	Closed
	2	Closed	Open	Closed
	3	Open	Open	Closed
	4	Closed	Closed	Open
	5	Open	Closed	Open
	6	Closed	Open	Open
	7	Open	Open	Open

TERMINATION POWER SELECTION

Note: External termination via pin 26 of interface.

MANUFACTURERS RECOMMENED MEDIA
Tape	Capacity Without Compression	Capacity With Compression
QIC-24 450/600ft.	45/60MB	Unidentified
QIC-120 600ft.	125MB	Unidentified
QIC-150 600/1,000ft.	150/250MB	Unidentified
QIC-1000 760ft.	1.0GB	Unidentified

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	N/A	Off	Power off
LED1	N/A	Off	Power on, no media present
LED1	Green	On	Drive ready
LED1	Green	Blinking	Drive busy
LED1	Amber	On	Media removal prevented, ready
LED1	Amber	Blinking	Media removal prevented, busy
Note: Function of LED101 is unidentified.