lotus

previous page: DK100-S8  Tape drive card Settings and Configuration
  
page up: Tape Drives Specs
  
next page: MAXDAT3 E, MAXDAT3 ES Tape drive card Settings and Configuration

DK100-DE2 Tape drive card Settings and Configuration






KINGSTON TECHNOLOGY CORPORATION

DK100-DE2

Device Type

Internal Tape Drive

Interface

SCSI

Format

DAT, DDS

Sustained Transfer Rate

183 KBPS

Size

5.25 in. Half-height

View

Top

USER CONFIGURABLE SETTINGS

Setting

Label

Position

Factory configured - do not alter

J7

Unidentified

Termination enabled

W2

Pins 1 & 2 closed

 

Termination disabled

W2

Pins 2 & 3 closed

Factory configured - do not alter

J6

Unidentified

DRIVE SELECT ID

Note: SCSI ID is selected by either rotating the Unit Select Rotating Switch inside the Receiving Frame, or installing a connector at J4 and setting the ID through a remote location.

TERMINATION POWER SELECTION

Setting

W1

TERMPWR supplied by drive to SCSI interface

Closed

 

TERMPWR supplied by SCSI interface to drive

Open

MANUFACTURERS RECOMMENDED MEDIA

Tape

Capacity

90-meter DDS

2GB








TOP
previous page: DK100-S8  Tape drive card Settings and Configuration
  
page up: Tape Drives Specs
  
next page: MAXDAT3 E, MAXDAT3 ES Tape drive card Settings and Configuration