TR4 INTERNAL SCSI Tape drive card Settings and Configuration
IBM CORPORATION
TR4 INTERNAL SCSI
Device Type | Internal Tape Drive |
Interface | SCSI |
Format | QIC-3095 |
Sustained Transfer Rate | 500KBPS 1MBPS (compressed) |
Size | 3.5 in. half height |
View | Bottom |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Factory configured - do not alter. (Parity check enable/disable) | JP1/Pins 7 & 8 | Unidentified |
| » | Factory configured - do not alter | JP1/Pins 9-12 | Unidentified |
| » | Termination enabled | JP1/Pins 13 & 14 | Closed |
Termination disabled | JP1/Pins 13 & 14 | Open | |
DRIVE SELECT ID | |||
Drive ID | JP1/Pins 1 & 2 | JP1/Pins 3 & 4 | JP1/Pins 5 & 6 |
0 | Open | Open | Open |
| 1 | Closed | Open | Open |
2 | Open | Closed | Open |
3 | Closed | Closed | Open |
4 | Open | Open | Closed |
5 | Closed | Open | Closed |
6 | Open | Closed | Closed |
7 | Closed | Closed | Closed |
TERMINATION POWER SELECTION | ||
Setting | JP1/Pins 15 & 16 | |
| » | TERMPWR supplied by SCSI interface to drive | Open |
TERMPWR supplied by drive | Closed | |
MANUFACTURERS RECOMMENDED MEDIA | ||
Tape | Capacity Without Compression | Capacity With Compression |
3M TR4 (QIC-3095) | 4GB | 8GB |
My Books
