OPTIONS 35/70 GB, DLT INTERNAL TAPE Tape drive card Settings and Configuration

Device Type	Internal Tape Drive
Interface	SCSI-2 Fast/Wide
Format	DLT
Sustained Transfer Rate	5 MBPS, 10 MBPS
Size	5.25 in. third height
View	Top

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	JP1/Pins 1 & 2	Unidentified
»	Factory configured - do not alter	JP1/Pins 3 & 4	Unidentified
»	Factory configured - do not alter	JP1/Pins 5 & 6	Unidentified
»	Factory configured - do not alter	JP1/Pins 7 & 8	Unidentified
»	Factory configured - do not alter	JP1/Pins 9 & 10	Unidentified
»	Factory configured - do not alter	JP1/Pins 11 & 12	Unidentified
»	Factory configured - do not alter	JP1/Pins 13 & 14	Unidentified
»	Factory configured - do not alter	JP1/Pins 15 & 16	Unidentified
»	Factory configured - do not alter	JP1/Pins 17 & 18	Unidentified
»	Factory configured - do not alter	JP1/Pins 19 & 20	Unidentified
»	Factory configured - do not alter	JP1/Pins 21 & 22	Unidentified
»	Termination enabled	JP1/Pins 23 & 24	Closed
	Termination disabled	JP1/Pins 23 & 24	Open
»	Factory configured - do not alter	JP1/Pins 25 & 26	Unidentified
»	Factory configured - do not alter	JP2/Pins 1 & 2	Unidentified
»	Factory configured - do not alter	JP2/Pins 3 & 4	Unidentified
»	Factory configured - do not alter	JP2/Pins 5 & 6	Unidentified
»	Factory configured - do not alter	JP2/Pins 6 & 7	Unidentified
»	Factory configured - do not alter	JP2/Pins 8 & 9	Unidentified
»	Factory configured - do not alter	JP2/Pins 9 & 10	Unidentified
»	Factory configured - do not alter	JP2/Pins 11 & 12	Unidentified
»	Factory configured - do not alter	JP2/Pins 13 & 14	Unidentified
»	Factory configured - do not alter	JP2/Pins 15 & 16	Unidentified
»	Factory configured - do not alter	JP2/Pins 17 & 18	Unidentified
»	Factory configured - do not alter	JP2/Pins 19 & 20	Unidentified
»	Factory configured - do not alter	JP2/Pins 21 & 22	Unidentified
»	Factory configured - do not alter	JP2/Pins 23 & 24	Unidentified
»	Parity check disabled	JP2/Pins 25 & 26	Open
	Parity check enabled	JP2/Pins 25 & 26	Closed
»	Factory configured - do not alter	JP4	Unidentified

DRIVE SELECT ID
Drive ID		JP3/Pins 1 & 2	JP3/Pins 3 & 4	JP3/Pins 5 & 6
	0	Closed	Open	Open
»	1	Closed	Open	Open
	2	Closed	Open	Open
	3	Closed	Open	Open
	4	Closed	Open	Closed
	5	Closed	Open	Closed
	6	Closed	Open	Closed
	7	Closed	Open	Closed
	8	Closed	Closed	Open
	9	Closed	Closed	Open
	10	Closed	Closed	Open
	11	Closed	Closed	Open
	12	Closed	Closed	Closed
	13	Closed	Closed	Closed
	14	Closed	Closed	Closed
	15	Closed	Closed	Closed

DRIVE SELECT ID (CONT’D)
Drive ID		JP3/Pins 7 & 8	JP3/Pins 9 & 10
	0	Open	Open
»	1	Open	Closed
	2	Closed	Open
	3	Closed	Closed
	4	Open	Open
	5	Open	Closed
	6	Closed	Open
	7	Closed	Closed
	8	Open	Open
	9	Open	Closed
	10	Closed	Open
	11	Closed	Closed
	12	Open	Open
	13	Open	Closed
	14	Closed	Open
	15	Closed	Closed

MANUFACTURERS RECOMMENDED MEDIA
Tape	Capacity Without Compression	Capacity With Compression
IBM 59H3040	35GB	70GB
DLTtapeIII	10GB	20GB
DLTtapeIIIxt	15GB	30GB
DLTtapeIV	35GB	70GB

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Orange	On	Cartridge is write protected
LED1	Orange	Off	Cartridge is not write protected
LED2	Yellow	On	Tape is loaded and ready for use
LED2	Yellow	Off	Tape is not loaded
LED2	Yellow	Blinking	Tape is in motion
LED3	Yellow	On	Tape is damaged
LED3	Yellow	Off	Tape is in perfect working condition
LED4	Green	On	You can safely lift the insert/release handle
LED4	Green	Off	Do not lift the insert/release handle
LED4	Green	Blinking	Push the insert/release handle down
LED5	Unidentified	On	Density Override indicator on
LED5	Unidentified	Off	Density Override indicator off
LED6	Unidentified	On	Compress indicator on
LED6	Unidentified	Off	Compress indicator off
Note:LED’s 7 - 11 are capacity indicator lights, however, individual functions are unidentified.