HP C1539 Tape drive card Settings and Configuration

Device Type	Internal Tape Drive
Interface	SCSI-2
Format	DDS, DDS-2, DDS-DC
Sustained Transfer Rate	510 KBPS (native), 1 KBPS/1.5 KBPS (compressed)
Size	3.5 in. half height
View	Top

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	JP5	Unidentified
»	Media Recognition System enabled	SW1/3	Off
	Media Recognition System disabled	SW1/3	On
»	Factory configured - do not alter	SW1/4	On
»	Factory configured - do not alter	SW1/5	On
»	Factory configured - do not alter	SW1/6	On
»	Factory configured - do not alter	SW1/7	On
»	Factory configured - do not alter	SW1/8	On

DATA COMPRESSION SETTINGS
Function		SW1/1	SW1/2
»	Data compression enabled managed by system	On	On
	Data compression disabled	Off	Off
	Data compression disabled managed by system	Off	On
	Data compression enabled not managed by system	On	Off

DRIVE SELECT ID
Drive ID	JP2	JP3	JP4
0	Open	Open	Open
1	Open	Open	Closed
2	Open	Closed	Open
3	Open	Closed	Closed
4	Closed	Open	Open
5	Closed	Open	Closed
6	Closed	Closed	Open
7	Closed	Closed	Closed

TERMINATION POWER SELECTION
Setting		JP1
»	TERMPWR supplied by drive to SCSI interface	Open
	TERMPWR supplied by drive	Closed

MANUFACTURERS RECOMMENDED MEDIA
Tape	Capacity Without Compression	Capacity With Compression
60 meter DDS cartridge	1.3GB	2.6GB
90 meter DDS cartridge	2.0GB	4.0GB
120 meter DDS cartridge	4.0GB	8.0/16.0GB
Note: Maximum capacity is dependent on data type.

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Cartridge present, drive active
LED1	Green	Slow Blinking	Cartridge loading or unloading
LED1	Green	Fast Blinking	Cartridge is being read or written to
LED1	Green	Off	No power/drive Idle, no cartridge
LED2	Yellow	On	Drive fault detected
LED2	Yellow	Blinking	Drive cleaning required
LED2	Yellow	Off	No drive fault detected