External Tape Drive
Sustained Transfer Rate
5.25 in. full height
Prompts user to load the cartridge.
Cartridge is loaded
Drive is selected on the SCSI bus
Drive is not selected on the SCSI bus
The drive is reading/writing compressed data
The drive is reading/writing uncompressed data
Note: LEDís 4 through 10 each represent the different tape positions between BOT and EOT. When the tape is moving in the forward position, the LEDís light up sequentially starting from the BOT position. When the tape is moving in reverse, the LEDís light up sequentially in the reverse order.
MISCELLANEOUS TECHNICAL NOTES
The IPM is an adapter card that is available in four different configurations: 50-pin SCSI connector (2x), 68-pin SCSI connector (2x), 50-pin SCSI connector & Terminating Resistor, 68-pin SCSI connector & Terminating Resistor. The Termination Power is supplied by the SCSI interface through pin 36. This setting is only valid with this specific IPM installed.