AUDIO ADAPTER Sound card Settings and Configuration

Card Type	Sound card
Chipset Controller	Creative Labs
I/O Options	Audio extension connector, CD-ROM audio, CD-ROM drive interface, game/MIDI port, line in, microphone in, speaker out, volume
Maximum DRAM	N/A

CONNECTIONS
Purpose	Location	Purpose	Location
Game/MIDI port	CN1	Speaker out	J4
CD audio in	J1	CD-ROM drive interface	JP3
Line in	J2	*8-pin audio extension connector	JP24
Mic in	J3	Volume	VR1
*Note: Look at pin out table below.

JP24 CONNECTIONS
Purpose	Location
Mic jack right	Pin 1
Ground	Pin 2
Mic jack, preamp in	Pin 3
Ground	Pin 4
Speaker amp out	Pin 5
Speaker jack right	Pin 8
Note: See Amplifier configuration table for pins 6 & 7.

AMPLIFIER CONFIGURATION
Setting		JP23	JP24 pins 6 & 7
»	Disabled	Open	Open
	Enabled	Closed	Closed

DMA CHANNELSELECTION
Channel		JP17	JP18	JP19	JP20	JP21	JP22
»	1	Open	Closed	Open	Open	Closed	Open
	0	Closed	Open	Open	Closed	Open	Open
	3	Open	Open	Closed	Open	Open	Closed

DMA SHARING CONFIGURATION
Setting		JP9
»	Disabled	Pins 1 & 2 closed
	Enabled	Pins 2 & 3 closed

CD-ROM INTERRUPT SELECTION
IRQ		JP4	JP5	JP6	JP7
»	11	Open	Closed	Open	Open
	3	Closed	Open	Open	Open
	12	Open	Open	Closed	Open
	15	Open	Open	Open	Closed

AUDIO ADAPTER INTERRUPT SELECTION
IRQ		JP13	JP14	JP15	JP16
»	7	Open	Open	Closed	Open
	2/9	Closed	Open	Open	Open
	5	Open	Closed	Open	Open
	10	Open	Open	Open	Closed

AUDIO PORT ADDRESS SELECTION
Address		JP10	JP11
»	220h	Closed	Open
	240h	Open	Closed

CD-ROM PORT ADDRESS SELECTION
Address		JP26	JP27
»	340h	Pins 2 & 3 closed	Pins 2 & 3 closed
	300h	Pins 1 & 2 closed	Pins 1 & 2 closed
	310h	Pins 2 & 3 closed	Pins 1 & 2 closed
	330h	Pins 1 & 2 closed	Pins 2 & 3 closed

GAME PORT CONFIGURATION
Setting		JP8
»	Enabled	Closed
	Disabled	Open

FACTORY CONFIGURED - DO NOT ALTER
Jumper	Position
JP12	N/A
JP25	N/A