WSB-100 VER. 1 Sound card Settings and Configuration

QUATECH, INC.

WSB-100 VER. 1

Card Type
Waveform Synthesizer
Chipset/Controller
Intel
I/O Options
Analog/Clock/Digital/Strobe I/O ports
Maximum DRAM
N/A

CONNECTIONS
Purpose
Location
Purpose
Location
Analog output
CN1
Module signal connector
CN5
Strobe/clock/trigger connector
CN2
Multi-board data connector
CN6
Strobe/clock/trigger connector
CN3
Multi-board control connector
CN7
Module power connector
CN4

I/O ADDRESS CONFIGURATION
Address
SW1
SW2
»
300h
1, 2, 3, 4, 5 & 6 on
3, 4, 5 & 6 on

330h
1, 2, 3, 4, 5 & 6 on
3 & 4

2A60hh
1, 2, 4 & 6 on
2, 3 & 6 on
Note: The address range for the WSB-100 is from 0 to FFFFh. The switches are a binary representation of the addresses. The switches have the following decimal values: SW1/1=8, SW1/2=4, SW1/3=2, SW1/4=1, SW1/5=8, SW1/6=4, SW2/1=2, SW2/2=1, SW2/3=8, SW2/4=4, SW2/5=2, SW2/6=1, The DMM-100 requires sixteen consecutive address locations.

OPERATING MODE CONFIGURATION
Mode
J1
J2
Single board system
1 & 11, 2 & 12, 3 & 13, 4 & 14, 5 & 15, 6 & 16, 7 & 17, 8 & 18, 9 & 19, 10 & 20 closed
1 & 9, 2 & 10, 3 & 11, 4 & 12, 5 & 13,
6 & 14, 7 & 15, 8 & 16 closed

OPERATING MODE CONFIGURATION
Mode
J1
J2
Single board system with delayed trigger
1 & 11, 2 & 12, 3 & 13, 4 & 14, 5 & 15, 6 & 16, 7 & 17, 8 & 18, 9 & 19, 10 & 20 closed
1 & 9, 2 & 10, 3 & 11, 4 & 12, 5 & 13, 14 & 22, 7 & 15, 8 & 16 closed
Simultaneous output - master board
1 & 11, 2 & 12, 3 & 13, 4 & 14, 5 & 15, 6 & 16, 9 & 19, 10 & 20 closed
7, 17, 27, 8, 18 & 28 open
9 & 17, 2 & 10, 3 & 11, 4 & 12, 5 & 13, 6 & 14, 15 & 23, 16 & 24 closed
Simultaneous output - slave board
1 & 11, 12 & 22, 13 & 23,14 & 24,
15 & 25, 16 & 26, 19 & 29, 20 & 30 closed
7, 17, 27, 8, 18 & 28 open
9 & 17, 2 & 10, 3 & 11, 4 & 12, 5 & 13, 6 & 14, 15 & 23, 8 & 16 closed
Master/slave mode - master board
1 & 11, 2 & 12, 3 & 13, 4 & 14, 5 & 15, 6 & 16, 7 & 17, 8 & 18, 9 & 19, 10 & 20 closed
9 & 17, 10 & 18, 11 & 19, 12 & 20,
5 & 13, 6 & 14, 7 & 15, 8 & 16 closed
Master/slave mode - slave board
11 & 21, 12 & 22, 13 & 23, 14 & 24,
15 & 25, 16 & 26, 17 & 27, 18 & 28,
19 & 29, 20 & 30 closed
9 & 17, 10 & 18, 11 & 19, 12 & 20,
5 & 13, 6 & 14, 7 & 15, 8 & 16 closed
Slave interrupting mode - master board
1 & 11, 2 & 12, 3 & 13, 4 & 14, 5 & 15, 6 & 16, 7 & 17, 8 & 18, 9 & 19, 10 & 20 closed
9 & 17, 2 & 10, 11 & 19, 4 & 12,
5 & 13, 6 & 14, 7 & 15, 8 & 16 closed
Slave interrupting mode - slave board
1 & 11, 12 & 22, 13 & 23, 14 & 24,
15 & 25, 16 & 26, 17 & 27, 18 & 28,
19 & 29, 20 & 30 closed
9 & 17, 2 & 10, 3 & 11, 4 & 12,
13 & 21, 6 & 14, 7 & 15, 8 & 16 closed

EXTERNAL CLOCK
Source/Clock
J3
J4
J5
CN2/clock 1
pins 1 & 4 closed
N/A
pins 5 & 6 closed
CN3/clock 2
N/A
pins 1 & 4 closed
pins 2 & 3 closed

TRIGGER SOURCE
Source
J3
J4
J5
CN2
pins 3 & 6 closed
N/A
pins 5 & 6 closed
CN3
N/A
pins 3 & 6 closed
pins 2 & 3 closed

TRIGGER CLOCK
Source
J3
J4
J5
CN2
pins 2 & 5 closed
N/A
pins 5 & 6 closed
CN3
N/A
pins 2 & 5 closed
pins 2 & 3 closed

CN2 I/O CONFIGURATION
I/O
J3
J5
Clock 1 input
pins 1 & 4 closed
pins 5 & 6 closed
Trigger delay clock input
pins 2 & 5 closed
pins 5 & 6 closed

CN2 I/O CONFIGURATION
I/O
J3
J5
External trigger input
pins 3 & 6 closed
pins 5 & 6 closed
Data rate clock output
N/A
pins 4 & 5 closed

CN3 I/O CONFIGURATION
I/O
J4
J5
Clock 2 input
pins 1 & 4 closed
pins 2 & 3 closed
Trigger delay clock input
pins 2 & 5 closed
pins 2 & 3 closed
External trigger input
pins 3 & 6 closed
pins 2 & 3 closed
Data rate clock output
N/A
pins 1 & 2 closed

DMA SELECT
Setting
J6
»
DMA 5
pins 3 & 6 closed

DMA 6
pins 2 & 5 closed

DMA 7
pins 1 & 4 closed

INTERRUPT SELECT
IRQ
J7
J8
IRQ3
N/A
pins 1 & 7 closed
IRQ4
N/A
pins 2 & 8 closed
IRQ5
N/A
pins 3 & 9 closed
IRQ6
N/A
pins 4 & 10 closed
IRQ7
N/A
pins 5 & 11 closed
IRQ9
N/A
pins 6 & 12 closed
IRQ10
pins 5 & 10 closed
N/A
IRQ11
pins 4 & 9 closed
N/A
IRQ12
pins 3 & 8 closed
N/A
IRQ14
pins 2 & 7 closed
N/A
IRQ15
pins 1 & 6 closed
N/A

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

WSB-100 VER. 1 Sound card Settings and Configuration

Search

My Books

Discover

Card Type	Waveform Synthesizer
Chipset/Controller	Intel
I/O Options	Analog/Clock/Digital/Strobe I/O ports
Maximum DRAM	N/A

CONNECTIONS
Purpose	Location	Purpose	Location
Analog output	CN1	Module signal connector	CN5
Strobe/clock/trigger connector	CN2	Multi-board data connector	CN6
Strobe/clock/trigger connector	CN3	Multi-board control connector	CN7
Module power connector	CN4

I/O ADDRESS CONFIGURATION
Address		SW1	SW2
»	300h	1, 2, 3, 4, 5 & 6 on	3, 4, 5 & 6 on
	330h	1, 2, 3, 4, 5 & 6 on	3 & 4
	2A60hh	1, 2, 4 & 6 on	2, 3 & 6 on
Note: The address range for the WSB-100 is from 0 to FFFFh. The switches are a binary representation of the addresses. The switches have the following decimal values: SW1/1=8, SW1/2=4, SW1/3=2, SW1/4=1, SW1/5=8, SW1/6=4, SW2/1=2, SW2/2=1, SW2/3=8, SW2/4=4, SW2/5=2, SW2/6=1, The DMM-100 requires sixteen consecutive address locations.

OPERATING MODE CONFIGURATION
Mode	J1	J2
Single board system	1 & 11, 2 & 12, 3 & 13, 4 & 14, 5 & 15, 6 & 16, 7 & 17, 8 & 18, 9 & 19, 10 & 20 closed	1 & 9, 2 & 10, 3 & 11, 4 & 12, 5 & 13, 6 & 14, 7 & 15, 8 & 16 closed

OPERATING MODE CONFIGURATION
Mode	J1	J2
Single board system with delayed trigger	1 & 11, 2 & 12, 3 & 13, 4 & 14, 5 & 15, 6 & 16, 7 & 17, 8 & 18, 9 & 19, 10 & 20 closed	1 & 9, 2 & 10, 3 & 11, 4 & 12, 5 & 13, 14 & 22, 7 & 15, 8 & 16 closed
Simultaneous output - master board	1 & 11, 2 & 12, 3 & 13, 4 & 14, 5 & 15, 6 & 16, 9 & 19, 10 & 20 closed 7, 17, 27, 8, 18 & 28 open	9 & 17, 2 & 10, 3 & 11, 4 & 12, 5 & 13, 6 & 14, 15 & 23, 16 & 24 closed
Simultaneous output - slave board	1 & 11, 12 & 22, 13 & 23,14 & 24, 15 & 25, 16 & 26, 19 & 29, 20 & 30 closed 7, 17, 27, 8, 18 & 28 open	9 & 17, 2 & 10, 3 & 11, 4 & 12, 5 & 13, 6 & 14, 15 & 23, 8 & 16 closed
Master/slave mode - master board	1 & 11, 2 & 12, 3 & 13, 4 & 14, 5 & 15, 6 & 16, 7 & 17, 8 & 18, 9 & 19, 10 & 20 closed	9 & 17, 10 & 18, 11 & 19, 12 & 20, 5 & 13, 6 & 14, 7 & 15, 8 & 16 closed
Master/slave mode - slave board	11 & 21, 12 & 22, 13 & 23, 14 & 24, 15 & 25, 16 & 26, 17 & 27, 18 & 28, 19 & 29, 20 & 30 closed	9 & 17, 10 & 18, 11 & 19, 12 & 20, 5 & 13, 6 & 14, 7 & 15, 8 & 16 closed
Slave interrupting mode - master board	1 & 11, 2 & 12, 3 & 13, 4 & 14, 5 & 15, 6 & 16, 7 & 17, 8 & 18, 9 & 19, 10 & 20 closed	9 & 17, 2 & 10, 11 & 19, 4 & 12, 5 & 13, 6 & 14, 7 & 15, 8 & 16 closed
Slave interrupting mode - slave board	1 & 11, 12 & 22, 13 & 23, 14 & 24, 15 & 25, 16 & 26, 17 & 27, 18 & 28, 19 & 29, 20 & 30 closed	9 & 17, 2 & 10, 3 & 11, 4 & 12, 13 & 21, 6 & 14, 7 & 15, 8 & 16 closed

EXTERNAL CLOCK
Source/Clock	J3	J4	J5
CN2/clock 1	pins 1 & 4 closed	N/A	pins 5 & 6 closed
CN3/clock 2	N/A	pins 1 & 4 closed	pins 2 & 3 closed

TRIGGER SOURCE
Source	J3	J4	J5
CN2	pins 3 & 6 closed	N/A	pins 5 & 6 closed
CN3	N/A	pins 3 & 6 closed	pins 2 & 3 closed

TRIGGER CLOCK
Source	J3	J4	J5
CN2	pins 2 & 5 closed	N/A	pins 5 & 6 closed
CN3	N/A	pins 2 & 5 closed	pins 2 & 3 closed

CN2 I/O CONFIGURATION
I/O	J3	J5
Clock 1 input	pins 1 & 4 closed	pins 5 & 6 closed
Trigger delay clock input	pins 2 & 5 closed	pins 5 & 6 closed

CN2 I/O CONFIGURATION
I/O	J3	J5
External trigger input	pins 3 & 6 closed	pins 5 & 6 closed
Data rate clock output	N/A	pins 4 & 5 closed

CN3 I/O CONFIGURATION
I/O	J4	J5
Clock 2 input	pins 1 & 4 closed	pins 2 & 3 closed
Trigger delay clock input	pins 2 & 5 closed	pins 2 & 3 closed
External trigger input	pins 3 & 6 closed	pins 2 & 3 closed
Data rate clock output	N/A	pins 1 & 2 closed

DMA SELECT
Setting		J6
»	DMA 5	pins 3 & 6 closed
	DMA 6	pins 2 & 5 closed
	DMA 7	pins 1 & 4 closed

INTERRUPT SELECT
IRQ	J7	J8
IRQ3	N/A	pins 1 & 7 closed
IRQ4	N/A	pins 2 & 8 closed
IRQ5	N/A	pins 3 & 9 closed
IRQ6	N/A	pins 4 & 10 closed
IRQ7	N/A	pins 5 & 11 closed
IRQ9	N/A	pins 6 & 12 closed
IRQ10	pins 5 & 10 closed	N/A
IRQ11	pins 4 & 9 closed	N/A
IRQ12	pins 3 & 8 closed	N/A
IRQ14	pins 2 & 7 closed	N/A
IRQ15	pins 1 & 6 closed	N/A