SOUNDBLASTER AWE32 (CT2760 REV. 3) Sound card Settings and Configuration

Card Type	Sound card
Chip Set	Creative Technology
Maximum Onboard Memory	Unidentified
I/O Options	CD-ROM interfaces (3), microphone connector, line in connector, line out connector, speaker out connector, game/MIDI port, PC internal speaker, CD-ROM audio in connector, feature connector
Data Bus	16-bit ISA

CONNECTIONS
Function	Label	Function	Label
Line in connector	CN1	Mitsumi CD-ROM interface	CN7
Microphone connector	CN2	Sony CD-ROM interface	CN8
Line out connector	CN3	Panasonic CD-ROM interface	CN9
Speaker out connector	CN4	Feature connector	CN10
Game/MIDI port	CN5	PC internal speaker	JP15
CD-ROM audio in connector	CN6

USER CONFIGURABLE SETTINGS
Function		Label	Position
	EEPROM enabled	EEPROM	Unidentified
	EEPROM disabled	EEPROM	Unidentified
»	Factory configured – do not alter	JP16	Unidentified
»	Factory configured – do not alter	JP17	Unidentified
»	Joystick enabled	JYEN	Closed
	Joystick disabled	JYEN	Open
»	MP-401 enabled	MBFEN	Closed
	MP-401 disabled	MBFEN	Open
»	MP-401 I/O address select 330	MSEL	Closed
	MP-401 I/O address select 300	MSEL	Open
»	Factory configured – do not alter	SPDIF	Unidentified

DRAM CONFIGURATION

Note: Board is factory installed with 512KB memory. The maximum amount of onboard memory is unidentified.

DRAM JUMPER CONFIGURATION
Setting		JP2
»	Memory upgrade disabled	Pins 2 & 3 closed
	Memory upgrade enabled	Pins 1 & 2 closed

AUDIO I/O ADDRESS SELECTION
Address		IOS0	IOS1
»	220	Closed	Closed
	240	Open	Closed
	260	Closed	Open
	280	Open	Open

CSP CHIP SELECTION
Setting	APSD	IFSD
Enabled	Open	Open
Disabled	Closed	Closed