TOSHIBA
XM-6002B
Device Type | CD-ROM |
Interface | ATAPI |
Spin Rate | 16x |
Formats Supported Read | CD-XA, CD-DA, CD-I, CDI-Ready, CD-I Bridge, CD-ROM (Mode 1 & Mode 2), Photo-CD, Video CD, Red & Yellow Book, CD-G, CD-Extra |
View | Top |
CONNECTIONS | |||
Function | Label | Function | Label |
Analog audio out connector | CN1 | Digital audio out connector | CN2 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
» | Prevent the insertion and removal of CDs | JP2/Pins 1 & 2 | Closed |
Allow the insertion and removal of CDs | JP2/Pins 1 & 2 | Open | |
» | Factory configured - do not alter (Factory Test Modes) | JP2/Pins 3 - 6 | Unidentified |
ATAPI MASTER/SLAVE | ||
Setting | JP1 | |
Master in two drive system | Pins 1 & 2 closed | |
» | Slave in two drive system | Pins 3 & 4 closed |
Master/Slave determined by cable select | Pins 5 & 6 closed |