TXM4101L1 Optical drive card Settings and Configuration
TOSHIBA
TXM4101L1
Device Type | CD-ROM |
Interface | SCSI |
Spin Rate | 2x |
Formats Supported | CD-XA, CD-I, CD-ROM Bridge, Photo-CD, Red & Yellow Book |
View | Bottom |
CONNECTIONS | |||
Function | Label | Function | Label |
Audio line out | CN1 | Audio line out | CN2 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Parity check disabled | JP1/4 | Open |
Parity check enabled | JP1/4 | Closed | |
| » | Factory configured - do not alter | JP1/5 | Open |
| » | Allow insertion and removal of CD’s by command or eject button | JP1/6 | Open |
Prevent insertion and removal of CD’s | JP1/6 | Closed | |
| » | Normal operation mode | JP1/7 | Open |
Audio signal reproduction mode | JP1/7 | Closed | |
| » | Shared terminator power disabled | JP1/8 | Open |
Shared terminator power enabled | JP1/8 | Closed | |
DRIVE SELECT ID | |||
Drive ID | JP1/1 | JP1/2 | JP1/3 |
0 | Open | Open | Open |
1 | Closed | Open | Open |
2 | Open | Closed | Open |
3 | Closed | Closed | Open |
4 | Open | Open | Closed |
5 | Closed | Open | Closed |
6 | Open | Closed | Closed |
7 | Closed | Closed | Closed |
My Books
