TXM3401E1 (SCSI SWITCH)
238 x 70 x 222mm
CD-XA, CD-I Ready, CD Bridge, Photo CD, Red book, Yellow book
Audio out - left channel
Audio out - right channel
MISCELLANEOUS TECHNICAL NOTES
The SCSI ID switch (SW) is used to select the drive ID. The number in the window corresponds to the selected SCSI ID. To change the SCSI ID, press the "+" or "-" lever for higher or lower number. After the "7" ID there are 2 blank spots, the first is for "Play audio CD" mode, the second is not used at this time.
To change SCSI ID turn power off/on for the change to take effect.