CDW-900E Optical drive card Settings and Configuration

Device Type	External CD-ROM
Interface	SCSI
Spin Rate (Read/Write)	Unidentified
Formats Supported Read	Unidentified
Formats Supported Write	Unidentified
View	Top

CONNECTIONS
Function	Label	Function	Label
Auxilary line in	CN1	Data line out	CN4
Digital audio line out	CN2	Control I/F in	CN5
Data line in	CN3	Control I/F out	CN6

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Parity check enabled	SW1/4	On
	Parity check disabled	SW1/4	Off
»	Factory configured - do not alter	SW1/5	Reserved
»	Terminator power enabled	SW1/6	On
	Terminator power disabled	SW1/6	Off
»	Factory configured - do not alter	SW1/7	Reserved
»	Encoder enabled	SW1/8	On
	Encoder disabled	SW1/8	Off
»	Factory configured - do not alter	SW2/5	Reserved
»	Data writing enabled	SW2/6	On
	Data writing disabled	SW2/6	Off
»	Control I/F disabled	SW2/7	On
	Control I/F enabled	SW2/7	Off
»	Termination enabled	SW2/8	On
	Termination disabled	SW2/8	Off
Note: The location of SW1 is unidentified.

DRIVE SELECT ID
SCSI ID		SW1/1	SW1/2	SW1/3
	0	Off	Off	Off
»	1	On	Off	Off
	2	Off	On	Off
	3	On	On	Off
	4	Off	Off	On
	5	On	Off	On
	6	Off	On	On
	7	On	On	On
Note: The location of SW1 is unidentified.

WRITER ID SELECTION
Writer ID		SW2/1	SW2/2	SW2/3	SW2/4
»	0	Off	Off	Off	Off
	1	On	Off	Off	Off
	2	Off	On	Off	Off
	3	On	On	Off	Off
	4	Off	Off	On	Off
	5	On	Off	On	Off
	6	Off	On	On	Off
	7	On	On	On	Off
	8	Off	Off	Off	On
	9	On	Off	Off	On
	10	Off	On	Off	On
	11	On	On	Off	On
	12	Off	Off	On	On
	13	On	Off	On	On
	14	Off	On	On	On
	15	On	On	On	On
Note: The location of SW2 is unidentified.