CSP-940S Optical drive card Settings and Configuration

Device Type	CD-ROM
Interface	SCSI-2
Spin Rate (Read/Write)	4x/2x
Formats Supported Read	CD-XA*, CD-DA, CD-R (Conforming to Orange Book - part 2), CD-I*, CD-I Ready*, CD-ROM (Mode 1 & Mode 2) Red & Yellow Book, CD-G, CD-Bridge
Formats Supported Write	CD-XA*, CD-DA, CD-R, CD-I*, CD-I Ready*, CD-ROM (Mode 1 & Mode 2), Red & Yellow Book, CD-Bridge
View	Top

CONNECTIONS
Function	Label	Function	Label
Audio out connector	CN1	Ground connector	CN2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter.	JP1/Pins 9 & 10	Unidentified
»	Allow insertion/removal of CDs via eject button/command	JP1/Pins 11 & 12	Closed
	Disallow insertion/removal of CDs via eject button/command	JP1/Pins 11 & 12	Open
»	Normal operation enabled	JP1/Pins 13 & 14	Open
	Test mode enabled	JP1/Pins 13 & 14	Closed

DRIVE SELECT ID
Drive ID	JP1/Pins 3 & 4	JP1/Pins 5 & 6	JP1/Pins 7 & 8
0	Open	Open	Open
1	Closed	Open	Open
2	Open	Closed	Open
3	Closed	Closed	Open
4	Open	Open	Closed
5	Closed	Open	Closed
6	Open	Closed	Closed
7	Closed	Closed	Closed

DEVICE TYPE SELECT
Device Type		JP1/Pins 1 & 2
»	CD-ROM enabled	Open
	WORM enabled	Closed

MISCELLANEOUS TECHNICAL NOTES

Termination is unidentified. *With additional hardware and/or software upgrades, the following additional formats will be recognized for both read and write functions: CD-XA, CD-I, and CD-I Ready.