PX-40TSE EXTERNAL Optical drive card Settings and Configuration
PLEXTOR
PX-40TSE EXTERNAL
Device Type | External CD-ROM |
Interface | 50-pin SCSI (2) |
Spin Rate (Read) | 40x |
Formats Supported Read | CD-XA, CD-DA, CD-R, CD-I, CD-ROM (Mode 1 & Mode 2), Photo-CD, Video CD, CD-Plus, CD-E |
View | Top |
CONNECTIONS | |||
Function | Label | Function | Label |
Audio line out - right | CN1 | Audio line out - left | CN2 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
» | Parity check enabled | SW1/1 | On |
| Parity check disabled | SW1/1 | Off |
» | Termination enabled | SW1/2 | On |
| Termination disabled | SW1/2 | Off |
» | Factory configured - do not alter | SW1/3 | Off |
» | Block disabled | SW1/4 | Off |
| Block enabled | SW1/4 | On |
» | Eject lock disabled | SW1/5 | Off |
| Eject lock enabled | SW1/5 | On |
SCSI ID SELECTION |
Note: To select the SCSI ID rotate SW2 to the desired ID number. |
My Books
