PX-20TSE Optical drive card Settings and Configuration
PLEXTOR
PX-20TSE
Device Type | External CD-ROM |
Interface | SCSI |
Spin Rate | 20x |
Formats Supported | CD-XA, CD-DA, CD-I, CD-ROM (Mode 1 & Mode 2), Photo-CD, Video CD, CD+G |
View | Top |
CONNECTIONS | |||
Function | Label | Function | Label |
Audio line out - right | CN1 | Audio line out - left | CN2 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Parity enabled | SW1/1 | On |
Parity disabled | SW1/1 | Off | |
| » | Terminator enabled | SW1/2 | On |
| Terminator disabled | SW1/2 | Off | |
| » | Factory configured - do not alter | SW1/3 | Off |
| » | Boot from CD-ROM disabled | SW1/3 | Off |
Boot from CD-ROM enabled (UNIX systems only) | SW1/4 | On | |
| » | CD-ROM eject button enabled | SW1/4 | Off |
CD-ROM eject button disabled | SW1/5 | On | |
DRIVE SELECT ID |
Note: To change SCSI ID, insert screwdriver into rotary dial and move to desired position. |
My Books
