PX-12CSI, PX-12TSI Optical drive card Settings and Configuration
PLEXTOR
PX-12CSI, PX-12TSI
Device Type | CD-ROM |
Interface | SCSI |
Size | 5.25 in. half height |
Spin Rate | 12X |
Formats Supported | CD-ROM Mode 1, CD-DA, CD-I, CD-XA (Mode 2, Form 1, Form 2), Video CD, Photo CD, CD Plus, CD-G, Karaoke |
View | Top |
CONNECTIONS | |||
Function | Label | Function | Label |
Audio out | CN1 | ||
DRIVE SELECT ID | ||||
Drive ID | JP1/jumper 1 | JP1/jumper 2 | JP1/jumper 3 | |
0 | Open | Open | Open | |
1 | Closed | Open | Open | |
2 | Open | Closed | Open | |
| » | 3 | Closed | Closed | Open |
4 | Open | Open | Closed | |
5 | Closed | Open | Closed | |
6 | Open | Closed | Closed | |
7 | Closed | Closed | Closed | |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Parity check enabled | JP1/jumper 4 | Closed |
Parity check disabled | JP1/jumper 4 | Open | |
| » | SCSI termination enabled | JP1/jumper 5 | Closed |
SCSI termination disabled | JP1/jumper 5 | Open | |
| » | Factory configured - do not alter | JP1/jumper 6 | Open |
| » | Block mode disabled | JP1/jumper 7 | Open |
Block mode enabled | JP1/jumper 7 | Closed | |
| » | Eject mode disabled | JP1/jumper 8 | Open |
Eject mode enabled | JP1/jumper 8 | Closed | |
Note:Block mode enables the CD-ROM as a boot drive when working in a UNIX environment. When Eject mode is enabled, a disc can not be ejected with the eject button. Software must be used in order to eject the disc. | |||
My Books
