PX-R24CSE Optical drive card Settings and Configuration

Device Type	CD-R (CD Recorder)
Interface	SCSI
Size	5.25 in. half height
Spin Rate	1x (read/write), 2x (read/write), 4x (read only)
Formats Supported	CD-DA, CD-ROM+CD-DA, CD-XA (write, read, play) CD-ROM, CD-I, Photo CD (write, read)
View	Top

CONNECTIONS
Function	Label	Function	Label
Audio out - right channel	CN2	Audio out - left channel	CN3

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	SW1/1	Off
»	Device is identified as CD-ROM drive	SW1/2	Off
	Device is identified as write once device	SW1/2	On
»	Factory configured - do not alter	SW1/3	Off
»	Factory configured - do not alter	SW1/4	Off
»	Firmware upgrade disabled	SW1/5	Off
	Firmware upgrade enabled	SW1/5	On

DRIVE SELECT ID
Drive ID	SW2 position
0	0
1	1
2	2
3	3
4	4
5	5
6	6
7	7

MISCELLANEOUS TECHNICAL NOTES

The drive comes with a terminator installed on one of its SCSI connectors. To disable termination, remove the terminator.