EXPLORER CD RECORDER, RCD 5040 (INTERNAL) Optical drive card Settings and Configuration

Device Type	Recordable CD
Interface	SCSI-1
Spin Rate - Read	4x
Spin Rate - Write	2x
Formats Supported	Unidentified
View	Top

CONNECTIONS
Function	Label
Audio out	CN1

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Termination enabled	JP1/jumper 1	Closed
	Termination disabled	JP1/jumper 1	Open
»	Factory configured - do not alter	JP1/jumper 2	Open
»	Parity check disabled	JP1/jumper 3	Open
	Parity check enabled	JP1/jumper 3	Closed

DRIVE SELECT ID
Drive ID		JP1/jumper 4	JP1/jumper 5	JP1/jumper 6
»	0	Open	Open	Open
	1	Open	Open	Closed
	2	Open	Closed	Open
	3	Open	Closed	Closed
	4	Closed	Open	Open
	5	Closed	Open	Closed
	6	Closed	Closed	Open
	7	Closed	Closed	Closed

DIAGNOSTIC LED(S) - NOT DIAGRAMMED
LED	Color	Status	Condition
Speed - front panel	Green	On	4x and 2x spin rate
Speed - front panel	Yellow	On	1x spin rate
Speed - front panel	N/A	Off	No disc inserted
Busy - front panel	Green	On	Reading data from disc
Busy - front panel	Yellow	On	Writing data or audio to disc
Busy - front panel	Yellow	Blinking	Playing audio
Busy - front panel	N/A	Off	Idle or no disc inserted

MISCELLANEOUS TECHNICAL NOTES

Host adapter for the RCD 5040 in a PC system is Adaptec AHA-1535. Host adapter for the Explorer CD Recorder can be Pinnacle SCSI controller card or Adaptec SCSI host adapter models AHA-152XA, AHA-153X, AHA-154XC, AHA-274X, AHA-284X , AHA-294X.