ZOT-N200E2/EC/ET Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear Bus, Star
Wiring Type	RG-58A/U 50ohm coaxial Unshielded twisted pair
Boot ROM	Available

BOOT ROM
Setting		JP1/A
»	Disabled	Open
	Enabled	Closed

BASE MEMORY ADDRESS SELECT
Address		JP1/B	JP1/C	JP1/D
»	C8000h	Open	Open	Open
	C4000h	Closed	Closed	Open
	CC000h	Open	Open	Closed
	D0000h	Open	Closed	Open
	D4000h	Open	Closed	Closed
	D8000h	Closed	Open	Open
	DC000h	Closed	Open	Closed
	E0000h	Closed	Closed	Closed

I/O ADDRESS SELECT
Address		JP1/E	JP1/F
»	300 - 31Fh	Open	Open
	320 - 33Fh	Open	Closed
	340 - 35Fh	Closed	Open
	360 - 37Fh	Closed	Closed

INTERRUPT SELECT
IRQ		JP3/A	JP3/B	JP3/C	JP3/D	JP3/E	JP3/F	JP3/G	JP3/H
»	IRQ3	Open	Closed	Open	Open	Open	Open	Open	Open
	IRQ2	Closed	Open	Open	Open	Open	Open	Open	Open
	IRQ4	Open	Open	Closed	Open	Open	Open	Open	Open
	IRQ5	Open	Open	Open	Closed	Open	Open	Open	Open
	IRQ10	Open	Open	Open	Open	Closed	Open	Open	Open
	IRQ11	Open	Open	Open	Open	Open	Closed	Open	Open
	IRQ12	Open	Open	Open	Open	Open	Open	Closed	Open
	IRQ15	Open	Open	Open	Open	Open	Open	Open	Closed

SYSTEM COMPATIBILITY
System		JP2
»	Fully IBM compatible	Closed
	Other	Open

DIAGNOSTIC LEDS
LED	Color	Status	Condition
LED1	Green	Off	Data is not being transmitted/received via BNC port
LED1	Green	On	Data is being transmitted/received via BNC port
LED2	Red	Off	Network UTP connection is broken
LED2	Red	On	Network UTP connection is good