A104-ENET Network Card Settings and Configuration
UNIDENTIFIED
A104-ENET
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | Proprietary module |
Topology | Linear bus |
Wiring Type | AUI transceiver via DB-15 port AUI transceiver via 15-pin interface |
Boot ROM | Available |
SOFTWARE/HARDWARE CONFIGURATION | |||
Setting | Boot ROM | JP1 | |
» | Hardware | Disabled | Pins 2 & 3 closed |
| Software | Enabled | Pins 1 & 2 closed |
DIAGNOSTIC LED(S) | ||
Color | Status | Condition |
Green | Off | Data is not being transmitted/received |
Green | Blinking | Data is being transmitted/received |
Yellow | Off | No collision is occurring |
Yellow | Blinking | Collision is occurring |
Note: The location of the green and yellow LED's relative to each other is unspecified in manufacturer documentation. | ||
CONNECTIONS | |
Purpose | Location |
Diagnostic LED connector 1 | J1 |
Diagnostic LED connector 2 | J2 |
Stackthrough bus connector 1 | P1 |
Stackthrough bus connector 2 | P2 |
My Books
