16-BIT THREE-IN-ONE BOARD Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear bus
Wiring Type	AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial Unshielded twisted pair
Boot ROM	Available

ADDRESS SELECT
I/O Address		Base Memory Address	JP1/B	JP1/C
»	300h	C800h	Closed	Closed
	320h	CC00h	Open	Closed
	340h	D000h	Closed	Open
	360h	D400h	Open	Open

BOOT ROM
Setting		JP1/A
»	Disabled	Open
	Enabled	Closed

CABLE TYPE
Type		JP3/A	JP3/B
»	RG-58A/U 50ohm coaxial	Pins 1 & 2 closed	Pins 1 & 2 closed
	AUI transceiver via DB-15 port	Pins 2 & 3 closed	Pins 1 & 2 closed
	Unshielded twisted pair	Pins 2 & 3 closed	Pins 2 & 3 closed

INTERRUPT SELECT
IRQ		JP2/A	JP2/B	JP2/C	JP2/D	JP2/E	JP2/F	JP2/G	JP2/H
»	IRQ3	Closed	Open	Open	Open	Open	Open	Open	Open
	IRQ4	Open	Closed	Open	Open	Open	Open	Open	Open
	IRQ5	Open	Open	Closed	Open	Open	Open	Open	Open
	IRQ9	Open	Open	Open	Closed	Open	Open	Open	Open
	IRQ10	Open	Open	Open	Open	Closed	Open	Open	Open
	IRQ11	Open	Open	Open	Open	Open	Closed	Open	Open
	IRQ12	Open	Open	Open	Open	Open	Open	Closed	Open
	IRQ15	Open	Open	Open	Open	Open	Open	Open	Closed

LINK TEST
Setting		JP4
»	Enabled	Pins 1 & 2 closed
	Disabled	Pins 2 & 3 closed

ZERO WAIT STATE
Setting		JP1/D
»	Disabled	Open
	Enabled	Closed

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow	On	Data is not being transmitted
LED1	Yellow	Blinking	Data is being transmitted
LED2	Red	On	Data is not being received
LED2	Red	Blinking	Data is being received
LED3	Green	On	Network connection is good
LED3	Green	Off	Network connection is broken