ET-002 Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear Bus
Wiring Type	RG-58A/U 50ohm coaxial AUI transceiver via DB-15 port
Boot ROM	Available

INTERRUPT REQUEST
IRQ		JP1A	JP1B	JP1C	JP1D	JP1E	JP1F	JP1G
	2	Closed	Open	Open	Open	Open	Open	Open
»	3	Open	Closed	Open	Open	Open	Open	Open
	4	Open	Open	Closed	Open	Open	Open	Open
	5	Open	Open	Open	Closed	Open	Open	Open
	7	Open	Open	Open	Open	Closed	Open	Open
	10	Open	Open	Open	Open	Open	Closed	Open
	11	Open	Open	Open	Open	Open	Open	Closed

I/O BASE ADDRESS
Address		JP2A	JP2B
»	300-31Fh	Closed	Closed
	320-33Fh	Open	Closed
	340-35Fh	Closed	Open
	360-37Fh	Open	Open

BOOT ROM
Setting		JP3
»	Disabled	Closed
	Enabled	Open

CABLE TYPE
Type		JP4
»	RG-58A/U 50ohm coaxial	Closed
	AUI transceiver via DB-15 port	Open

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Network connection is good
LED1	Green	Off	Network connection is broken