TE-16XP/C Network Card Settings and Configuration

NIC Type	Ethernet
Network Transfer Rate	10Mbps
Data Bus	8/16-bit ISA
Topology	Linear Bus
Wiring Type	RG-58A/U 50ohm coaxial (location unidentified)
Boot ROM	Available (location unidentified)

DIAGNOSTIC LED(S)
LED	Status	Condition
Power/TX	On	Power is on
Power/TX	Off	Power is off
Link/RX	On	Network connection is good
Link/RX	Off	Network connection is broken
Collision/Jabber	On	Collision is detected on network
Collision/Jabber	Off	Collision is not detected on network
Note:The LED locations are unidentified.

TECHNICAL NOTE

Note:Diagram of the board is unavailable.