E-FRL-MC04, E-FRL-MC04(SM), E-FRL-MC04(L) Network Card Settings and Configuration

Card Type	Ethernet Transceiver
NIC Type	Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Not available
Network Transfer Rate	10Mbps
Topology	Linear Bus, Star
Wiring Type	AUI transceiver via DB-15 port, Fiber optic cable
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AUI transceiver via DB-15	CN1	Fiber optic - ST transmit	CN3
Fiber optic - ST receive	CN3

USER CONFIGURABLE SETTINGS
Function	Label	Position
SQE enabled	SW1	On
SQE disabled	SW1	Off
Full duplex mode enabled	SW2	On
Half duplex mode enabled	SW2	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Red	On	Jabber detected on network
LED1	Red	Off	No jabber detected on network
LED2	Red	Blinking/On	Collision detected on network
LED2	Red	Off	No collision detected on network
LED3	Green	Blinking/On	Data is being transmitted
LED3	Green	Off	Data is not being transmitted
LED4	Green	Blinking/On	Data is being received
LED4	Green	Off	Data is not being received
LED5	Green	On	Network connection is good
LED5	Green	Off	Network connection is broken
LED6	Green	On	Receiving power
LED6	Green	Off	Not receiving power

MISCELLANEOUS TECHNICAL NOTES

The E-FRL-MC04 uses 850mn multi-mode fiber cable, the E-FRL-MC04(SM) uses 1300mn single-mode fiber cable, and the E-FRL-MC04(L) uses 1300mn multi-mode fiber cable.