TC6246-HZ (High Impedance) Network Card Settings and Configuration

NIC Type	ARCnet
Transfer Rate	2.5Mbps
Data Bus	16-bit MCA
Topology	Linear Bus
Wiring Type	RG-62A/U, 93ohm coaxial
Boot ROM	Available

INTERRUPT REQUEST
IR	JP0	JP1	JP2	JP3	JP4	JP5	JP6	JP7	JP8	JP9	JP10
3	Open	Open	Open	Open	Open	Open	Open	Open	Open	Open	Closed
4	Open	Open	Open	Open	Open	Open	Open	Open	Open	Closed	Open
5	Open	Open	Open	Open	Open	Open	Open	Open	Closed	Open	Open
6	Open	Open	Open	Open	Open	Open	Open	Closed	Open	Open	Open
7	Open	Open	Open	Open	Open	Open	Closed	Open	Open	Open	Open
9	Open	Open	Open	Open	Open	Closed	Open	Open	Open	Open	Open
10	Open	Open	Open	Open	Closed	Open	Open	Open	Open	Open	Open
11	Open	Open	Open	Closed	Open	Open	Open	Open	Open	Open	Open
12	Open	Open	Closed	Open	Open	Open	Open	Open	Open	Open	Open
14	Open	Closed	Open	Open	Open	Open	Open	Open	Open	Open	Open
15	Closed	Open	Open	Open	Open	Open	Open	Open	Open	Open	Open

CABLE LENGTH
Length		JP11	JP12
»	Under 20,000 feet	Open	Open
	Greater than 20,000 feet	Closed	Closed
Note: All NICs on the network must have this opition set the same.

DIAGNOSTIC LED(S)
LED	Status	Condition
LED1	On	Data is being transmitted or received
LED1	Off	Data is not being transmitted or received