ETHERNET SC Network Card Settings and Configuration
TECHNOLOGY WORKS
ETHERNET SC
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | SCSI |
Topology | Linear Bus |
Wiring Type | AUI Transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Boot ROM | Not available |
CONNECTIONS | |
Purpose | Location |
SCSI connector | S3 |
SCSI select switch | S4 |
DC power connector | S5 |
CABLE TYPE SELECTION | ||
Cable Type | S1 | S2 |
AUI Transceiver via DB-15 port | Not installed | Installed |
RG-58A/U 50ohm coaxial | Installed | Not installed |
DIAGNOSTIC LED(S) | ||
LED | Status | Condition |
LED1 | On | Thinnet is being used |
LED1 | Off | Thinnet is not being used |
LED2 | On | Data is being received |
LED2 | Off | Data is not being received |
LED3 | On | Data is being received |
LED3 | Off | Data is not being received |
LED4 | On | Data is being received |
LED4 | Off | Data is not being received |
LED5 | On | Data is being received |
LED5 | Off | Data is not being received |
LED6 | On | Data is being transmitted |
LED6 | Off | Data is not being transmitted |
LED7 | On | Data is being transmitted |
LED7 | Off | Data is not being transmitted |
LED8 | On | Data is being transmitted |
LED8 | Off | Data is not being transmitted |
LED9 | On | Data is being transmitted |
LED9 | Off | Data is not being transmitted |
LED10 | On | Thicknet is being used |
LED10 | Off | Thicknet is not being used |
My Books
