SK-NET FDDI NUBUS (SK-5441) Network Card Settings and Configuration

NIC Type	FDDI
Chip Set	Unidentified
Data Bus	NuBus
Network Transfer Rate	100Mbps
Topology	Ring
Wiring Type	Fiber optic cable
Boot ROM	Not available

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LD1	Red	Blinking	Card passed self-test and is executing firmware
LD1	Red	Off	Card did not pass self-test or is not executing firmware
LD2	Yellow	On	Network connection is good
LD2	Yellow	Off	Network connection is broken
LD3	Green	On	Card is transmitting or receiving data
LD3	Green	Off	Card is not transmitting or receiving data

MISCELLANEOUS TECHNICAL NOTE

No diagram is available for this card.