ELITECARD PLUS ELITE32 Network Card Settings and Configuration
STANDARD MICROSYSTEMS CORPORATION
ELITECARD PLUS ELITE32
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | 32-bit EISA |
Topology | Linear Bus |
Wiring Type | AUI Transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Boot ROM | Not available |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | Blinking | Data is being received (PortB) |
LED1 | Green | Off | Data is not being received (PortB) |
LED2 | Yellow | Blinking | Data is being received (PortA) |
LED2 | Yellow | Off | Data is not being received (PortA) |
LED3 | Green | Blinking | Data is being transmitted (PortB) |
LED3 | Green | Off | Data is not being transmitted (PortB) |
LED4 | Yellow | Blinking | Data is being transmitted (PortA) |
LED4 | Yellow | Off | Data is not being transmitted (PortA) |
My Books
