InterLan AT Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	8-bit ISA
Topology	Linear Bus
Wiring Type	Shielded Unshielded twisted pair RG-58A/U 50ohm coaxial AUI transceiver via DB-15 port
Boot ROM	Available

I/O BASE ADDRESS
Address	JP1	JP2	JP3	JP4
300h	Closed	Open	Open	Open
320h	Open	Closed	Open	Open
340h	Open	Open	Closed	Open
380h	Open	Open	Open	Closed

INTERRUPT REQUEST
IRQ	JP5	JP6	JP7	JP8
5	Closed	Open	Open	Open
6	Open	Closed	Open	Open
12	Open	Open	Closed	Open
15	Open	Open	Open	Closed

BOOT ROM ADDRESS
Address	JP9	JP10	JP11	JP12	JP13
Disabled	Closed	Open	Open	Open	Open
C0000h	Open	Closed	Open	Open	Open
C4000h	Open	Open	Closed	Open	Open
C8000h	Open	Open	Open	Closed	Open
CC000h	Open	Open	Open	Open	Closed

BASE MEMORY ADDRESS
Address	JP14	JP15	JP16	JP17
D0000h	Closed	Open	Open	Open
D4000h	Open	Closed	Open	Open
D8000h	Open	Open	Closed	Open
DC000h	Open	Open	Open	Closed

SYSTEM ARCHITECTURE
Setting		JP18	JP19
»	Compaq EISA	Pins 1 & 2 Closed	Pins 2 & 3 Closed
	IBM PC or PC XT	Pins 2 & 3 Closed	Pins 2 & 3 Closed
	Other	Pins 1 & 2 Closed	Pins 1 & 2 Closed

CABLE TYPE
Type	JP20
AUI transceiver via DB-15 port	Option 1
Shielded/Unshielded twisted pair	Option 2
RG--58A/U 50ohm coaxial	Option 3

LINK INTEGRITY TEST
Setting	JP21
Enabled	Pins 1 & 2 Closed
Disabled	Pins 2 & 3 Closed

DIAGNOSTIC LED(S)
Color	Status	Condition
Green	On	Card is connected to the network
Green	Blinking	Data is being received

MISCELLANEOUS NOTES

Not all cards have the LED indicator.