PDN508 Network Card Settings and Configuration
PURE DATA, LTD.
PDN508
NIC Type | ARCnet |
Transfer Rate | 2.5Mbps |
Data Bus | NEC MultiSpeed Interface |
Topology | Star |
Wiring Type | RG-62A/U 93ohm coaxial |
Boot ROM | Not available |
NODE ADDRESS |
Note:The node address is selected using the software supplied with the card. |
INTERRUPT REQUEST | ||||
IRQ | E1A | E1B | E1C | |
» | 2 | Open | Open | Closed |
| 3 | Open | Closed | Open |
| 5 | Closed | Open | Open |
I/O BASE ADDRESS | ||
Address | E2 | |
» | 2E0h | Closed |
| 300h | Open |
CABLE LENGTH AND RESPONSE/RECONFIGURATION TIMEOUTS | |||||
Cable Length | Response Time | Reconfiguration Time | E3 | E4 | |
» | < 20,000 feet | 74.7m s | 840ms | Open | Open |
| > 20,000 feet | 283.4m s | 1680ms | Open | Closed |
| > 20,000 feet | 561.8m s | 1680ms | Closed | Open |
| > 20,000 feet | 1118.6m s | 1680ms | Closed | Closed |
Note: All NICs on the network segment must have this option set the same. | |||||
NIC POWER | ||
Setting | SW1 | |
» | On | On |
| Off | Off |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Red | On | Data is being transmitted or received |
LED1 | Red | Off | Data is not being transmitted or received |
LED2 | Green | On | Card is reconfiguring |
LED2 | Green | Off | Normal operation |
My Books
