MN-600 PCI-BUS Network Card Settings and Configuration
MACROMATE
MN-600 PCI-BUS
NIC Type | Ethernet |
Network Transfer Rate | 10Mbps |
Data Bus | 32-bit PCI |
Topology | Linear Bus, Star |
Wiring Type | Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI transceiver via DB-15 port | CN1 | RG-58A/U 50ohm coaxial port | CN3 |
Unshielded twisted pair port | CN2 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Short heartbeat disabled | JP4 | Pins 2 & 3 closed |
Short heartbeat enabled | JP4 | Pins 1 & 2 closed | |
PCI INTERRUPT SELECTION | ||||
Setting | JP2/A | JP2/B | JP2/C | JP2/D |
INTA | Closed | Open | Open | Open |
INTB | Open | Closed | Open | Open |
INTC | Open | Open | Closed | Open |
INTD | Open | Open | Open | Closed |
CABLE TYPE SELECTION | ||
Type | JP3 | |
AUI transceiver via DB-15 port | Pins 1 & 2 closed | |
| » | RG-58A/U 50ohm coaxial | Pins 2 & 3 closed |
| » | Unshielded twisted pair | Pins 2 & 3 closed |
DIAGNOSTIC LED(S) | ||
LED | Status | Condition |
LED1 | On | 10Base-T network connection is good |
LED1 | Off | 10Base-T network connection is broken |
LED2 | On | Data is being transmitted/received |
LED2 | Off | Data is not being transmitted/received |
Note: The locations of LED1 and LED2 are unidentified. | ||
My Books
