MT-950F Network Card Settings and Configuration

Card Type	Ethernet Transceiver
NIC Type	Ethernet
Network Transfer Rate	10Mbps
Topology	Linear Bus
Wiring Type	AUI transceiver via DB-15 port Fiber optic cable
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AUI transceiver via DB-15	CN1	Fiber optic connector - TX	CN3
Fiber optic connector - RX	CN2

USER CONFIGURABLE SETTINGS
Function	Label	Position
í Signal Quality Error function disabled	SQE	Off
Signal Quality Error function enabled	SQE	On

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Green	On	Power being received from AUI connector
PWR	Green	Off	Power not being received
TXD	Green	Blinking	Data is being transmitted
TXD	Green	Off	Data is not being transmitted
RXD	Green	Blinking	Data is being received
RXD	Green	Off	Data is not being received
COL	Amber	On	Collision detected on network
COL	Amber	Off	No collision detected on network
LNK	Green	On	A valid connection to the fiber optic connector - RX detected
LNK	Green	Off	No valid connection to the fiber optic connector - RX detected
JAB	Amber	On	A frame greater than 1518 bytes is being transmitted
JAB	Amber	Off	Transmission is normal