KTN-903 Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear Bus/Star
Wiring Type	Unshielded twisted pair AUI Transceiver via DB-15 port RG-58A/U 50ohm coaxial
Boot ROM	Available

FACTORY CONFIGURED
Jumper	Position
JP6	not identified

CABLE TYPE SELECTION
Cable Type	JP2	JP3	JP7
Unshielded twisted pair	Open	Open	pins 1 & 2 closed
AUI Transceiver via DB-15 port	Open	Closed	pins 2 & 3 closed
RG-58A/U 50ohm coaxial	Closed	Open	pins 2 & 3 closed

BASE I/O ADDRESS SELECTION
Address		JP0	JP1
»	300h	Closed	Closed
	320h	Open	Closed
	340h	Closed	Open
	360h	Open	Open

INTERRUPT CONFUGURATION
Address	JP4/A	JP4/B	JP4/C	JP4/D
3	Open	Closed	Open	Open
4	Open	Open	Closed	Open
5	Open	Open	Open	Closed
9	Closed	Open	Open	Open

BOOT ROM CONFIGURATION
Setting	JP5
Enabled	pins 1 & 2 closed
Disabled	pins 2 & 3 closed