ETHERX KNE 100TX Network Card Settings and Configuration
KINGSTON TECHNOLOGY CORPORATION
ETHERX KNE 100TX
Card Type | Network Interface Card |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Available |
Network Transfer Rate | 10/100Mbps |
Topology | Star |
Wiring Type | RJ-45 Unshielded twisted pair |
Data Bus | 32-bit PCI |
CONNECTIONS | |
Function | Label |
RJ-45 UTP connector | CN1 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | Blinking | Data is being transmitted/received |
LED1 | Green | Off | Data is not being transmitted/received |
LED2 | Green | On | Network connection is good |
LED2 | Green | Off | Network connection is broken |
LED3 | Green | On | Network is using full duplex mode |
LED3 | Green | Off | Network is not using full duplex mode |
LED4 | Green | On | Card is operating at 100Mbs speed |
LED4 | Green | Off | Card is not operating at 100Mbs |
MISCELLANEOUS TECHNICAL NOTES |
EtheRX supports optional Boot ROM and extended chipset that is placed in U1, U2, and U3 |
My Books
