16/4 TOKEN RING ADAPTER Network Card Settings and Configuration

NIC Type	Token ring
Transfer Rate	4/16Mbps
Data Bus	16-bit ISA
Topology	Linear bus
Wiring Type	AUI transceiver via DB-15 port Unshielded twisted pair
Boot ROM	Not available

BASE ADDRESS SELECT
Address		SW2/1	SW2/2	SW2/3	SW2/4	SW2/5
»	CC000h	Off	Off	On	On	Off
	C0000h	Off	Off	Off	Off	Off
	C2000h	Off	Off	Off	Off	On
	C4000h	Off	Off	Off	On	Off
	C6000h	Off	Off	Off	On	On
	C8000h	Off	Off	On	Off	Off
	CA000h	Off	Off	On	Off	On
	CE000h	Off	Off	On	On	On
	D0000h	Off	On	Off	Off	Off
	D2000h	Off	On	Off	Off	On
	D4000h	Off	On	Off	On	Off
	D6000h	Off	On	Off	On	On
	D8000h	Off	On	On	Off	Off
	DA000h	Off	On	On	Off	On
	DC000h	Off	On	On	On	Off
	DE000h	Off	On	On	On	On

INTERRUPT SELECT
IRQ		SW1/7	SW1/8	SW1/9	SW1/10
»	IRQ2	On	Off	Off	Off
	IRQ3	Off	On	Off	Off
	IRQ6	Off	Off	On	Off
	IRQ7	Off	Off	Off	On

PRIMARY/ALTERNATE CARD
Setting		SW1/1
»	Primary	Off
	Alternate	On

SHARED RAM SIZE
Size		SW1/3	SW1/4	SW1/5	SW1/6
»	16KB	Off	On	Off	Off
	8KB	On	Off	Off	Off
	32KB	Off	Off	On	Off
	64KB	Off	Off	Off	On

DATA RATE
Setting		SW1/2
»	4Mbps	Off
	16Mbps	On

CABLE TYPE
Type	JP1/A	JP1/B	JP1/C	JP1/D
AUI transceiver via DB-15 port	Pins 2 & 3	Pins 2 & 3	Pins 2 &3	Pins 2 & 3
Unshielded twisted pair	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2
Note:All Pins designated should be placed in the closed position.

DIAGNOSTIC LEDS
LED1 (Green)	LED2 (Yellow)	Condition
Off	Off	Network connection is broken, or software initialization is unsuccessful.
Off	Blinking	Data is being transmitted, but the network connection is broken.
On	Off	Adapter failure
On	On	Network connection is good.