PE-300C Network Card Settings and Configuration
KATRON TECHNOLOGIES, INC.
PE-300C
NIC Type | Ethernet |
Network Transfer Rate | 10Mbps |
Data Bus | Parallel |
Topology | Linear Bus, Star |
Wiring Type | Unshielded twisted pair RG-58A/U 50ohm coaxial |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
Parallel port | CN1 | Unshielded twisted pair port | CN3 |
RG-58A/U 50ohm coaxial port | CN2 | DC power port | CN4 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | 10Base-T network connection is good |
LED1 | Green | Blinking | 10Base-T network connection is faulty or 10Base-T is at the end of the UTP link |
LED1 | Green | Off | 10Base-T network connection is broken |
LED2 | Yellow | On | Large packets of data are being transmitted/received |
LED2 | Yellow | Blinking | Small packets of data are being transmitted/received |
LED2 | Yellow | Off | Data is not being transmitted/received |
My Books
