ETHERNET VL3200E Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	VESA local bus
Topology	Linear Bus/Star
Wiring Type	Unshielded twisted pair RG-58A/U 50ohm coaxial
Boot ROM	Available

BASE I/O ADDRESS SELECTION
Address	JP2/A	JP2/B	JP2/C
300h	Open	Open	Open
Software configured	Closed	Open	Open
240h	Open	Closed	Open
280h	Closed	Closed	Open
2C0h	Open	Open	Closed
320h	Closed	Open	Closed
340h	Open	Closed	Closed
360h	Closed	Closed	Closed

INTERRUPT SELECTION
IRQ	JP2/D	JP2/E	JP2/F
3	Open	Open	Open
4	Closed	Open	Open
5	Open	Closed	Open
2	Closed	Closed	Open
10	Open	Open	Closed
11	Closed	Open	Closed
12	Open	Closed	Closed
15	Closed	Closed	Closed

BOOT ROM ADDRESS
Address	JP3/B	JP3/C	JP3/D	JP3/E
Disabled	Open	Open	Open	Open
C000h	Closed	Open	Open	Open
C400h	Closed	Closed	Open	Open
C800h	Open	Open	Closed	Open
CC00h	Closed	Open	Closed	Open
D000h	Open	Closed	Closed	Open
D400h	Closed	Closed	Closed	Open
D800h	Open	Open	Open	Closed
DC00h	Closed	Open	Open	Closed

JUMPERLESS OPERATION
Setting	JP3/F
Enabled	Closed
Disabled	Open

FACTORY CONFIGURED SETTINGS - DO NOT ALTER
Jumper	Position
JP3/A	Open
JP1	Open

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow	On	Network connection is good
LED1	Yellow	Off	Network connection is broken
LED2	Green	Blinking	Data is being transmitted/received
LED2	Green	Off	Data is not being transmitted/received