4811 E/FDDI ADAPTER (SAS ST CONNECTION) Network Card Settings and Configuration
INTERPHASE CORPORATION
4811 E/FDDI ADAPTER (SAS ST CONNECTION)
Card Type | Network Interface Card |
NIC Type | FDDI |
Maximum Onboard Memory | 128KB |
Boot ROM | Unidentified |
Network Transfer Rate | 100Mbps |
Topology | Ring, Peer-Peer |
Wiring Type | Fiber optic cable |
Data Bus | 32-bit EISA |
CONNECTIONS | |||
Function | Label | Function | Label |
Fiber optic connector - ST | CN1 | Fiber optic connector - ST | CN2 |
Note: Transmit and Receive connectors are distinguished by markings on the faceplate. | |||
DIAGNOSTIC LED(S) | ||||
LED1 (Yellow) | LED2 (Yellow) | LED3 (Green) | LED3 (Green) | Condition |
Off | Off | Off | On | Power to card |
On | Off | Off | On | Power on diagnostics |
Off | Off | On | On | Diagnostics passed |
Off | Blinking | On | On | CB Running |
Off | Off | Blinking | On | RC Running |
Off | On | Blinking | On | Ring connection good |
On | Off | Off | On | Adapter Failure |
Note: Definitions of "CB" and "RC" are unidentified. | ||||
My Books
