4811 E/FDDI ADAPTER (SAS UTP CONNECTION) Network Card Settings and Configuration
INTERPHASE CORPORATION
4811 E/FDDI ADAPTER (SAS UTP CONNECTION)
Card Type | Network Interface Card |
NIC Type | CDDI |
Maximum Onboard Memory | 128KB |
Boot ROM | Unidentified |
Network Transfer Rate | 100Mbps |
Topology | Ring, Peer-Peer |
Wiring Type | Unshielded twisted pair |
Data Bus | 32-bit EISA |
CONNECTIONS | |
Function | Label |
RJ-45 connector | CN1 |
DIAGNOSTIC LED(S) | ||||
LED1 (Yellow) | LED2 (Yellow) | LED3 (Green) | LED3 (Green) | Condition |
Off | Off | Off | On | Power to card |
On | Off | Off | On | Power on diagnostics |
Off | Off | On | On | Diagnostics passed |
Off | Blinking | On | On | CB Running |
Off | Off | Blinking | On | RC Running |
Off | On | Blinking | On | Ring connection good |
On | Off | Off | On | Adapter Failure |
Note: Definitions of "CB" and "RC" are unidentified. | ||||
My Books
