BNC PIC Network Card Settings and Configuration
IMC NETWORK CORPORATION
BNC PIC
NIC Type | Ethernet repeater |
Transfer Rate | 10Mbps |
Data Bus | 8-bit ISA |
Topology | Linear bus |
Wiring Type | RG58A/U 50ohm coaxial |
Boot ROM | Not Available |
CONNECTIONS | |
Purpose | Location |
Port 1 cabling option resistor kit socket(CORK) | CT1 |
Port 2 cabling option resistor kit socket(CORK) | CT2 |
Note: CORK kits are available from the manufacturer in 50, 75, or 93 Ohm sizes. | |
PRIMARY PORT TERMINATION POWER | ||
Setting | JP1 | |
| » | On-board termination power enabled | Closed |
On-board termination power disabled | Open | |
ALTERNATE PORT TERMINATION POWER | ||
Setting | JP2 | |
| » | On-board termination power enabled | Closed |
On-board termination power disabled | Open | |
My Books
