HP27236A Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear bus Star
Wiring Type	Unshielded twisted pair
Boot ROM	Available

BOOT ROM
Setting		S2/7
»	Disabled	On
	Enabled	Off

BASE MEMORY ADDRESS
Address		S3/1	S3/2	S3/S	S3/4	S3/5	S3/6	S3/7	S3/8
»	EC000h	On	On	On	Off	On	On	Off	Off
	FF000h	On	On	On	On	On	On	On	On
	EB000h	On	On	On	Off	On	Off	On	On
	ED000h	On	On	On	Off	On	On	Off	On
	EF000h	On	On	On	Off	On	On	On	On
	Disabled	Off	Off	Off	Off	Off	Off	Off	Off

DMA CONFIGURATION
DMA		S5/1	S5/2	S5/3	S5/4	S5/5	S5/6
»	1	Off	Off	On	Off	Off	On
	2	Off	On	Off	Off	On	Off
	3	On	Off	Off	On	Off	Off

I/O ADDRESS CONFIGURATION
Address		S2/1	S2/2	S2/3	S2/4	S2/5	S2/6
»	300h	On	On	Off	Off	Off	Off
	200h	On	Off	Off	Off	Off	Off
	250h	On	Off	Off	On	Off	On
	260h	On	Off	Off	On	On	Off
	280h	On	Off	On	Off	Off	Off
	290h	On	Off	On	Off	Off	On
	2A0h	On	Off	On	Off	On	Off
	2B0h	On	Off	On	Off	On	On
	2C0h	On	Off	On	On	Off	Off
	2D0h	On	Off	On	On	Off	On
	330h	On	On	Off	Off	On	On
	340h	On	On	Off	On	Off	Off
	350h	On	On	Off	On	Off	On
	3F0h	On	On	On	On	On	On

INTERRUPT SETTINGS
IRQ		S4/1	S4/2	S4/3	S4/4	S4/5	S4/6
»	IRQ3	Off	Off	Off	Off	On	Off
	IRQ4	Off	Off	Off	On	Off	Off
	IRQ5	Off	Off	On	Off	Off	Off
	IRQ7	On	Off	Off	Off	Off	Off

LOOPBACK
Mode		S1/1
»	Normal	To the right position
	Test	To the left position

FACTORY CONFIGURED SETTINGS
Switch	Setting
S1/1	N/A
S1/2	N/A
S1/3	N/A
S2/8	N/A
S4/7	N/A
S4/8	N/A
S5/7	N/A
S5/8	N/A