PE-002BT Network Card Settings and Configuration
GVC TECHNOLOGIES
PE-002BT
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | Parallel |
Topology | Linear Bus/Star |
Wiring Type | Unshielded twisted pair RG-58A/U 50ohm coaxial |
Boot ROM | Not available |
CABLE TYPE SELECTION | |
Cable Type | S1 |
Unshielded twisted pair | Position 1 |
RG-58A/U 50ohm coaxial | Position 2 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | 10Base-T polarity reversed |
LED1 | Green | Off | 10Base-T polarity normal |
LED2 | Green | On | 10Base-T network connection is good |
LED2 | Green | Off | 10Base-T network connection is broken |
LED3 | Amber | On | Network collision detected |
LED3 | Amber | Off | Network collision not detected |
LED4 | Green | Blinking | Data is being received |
LED4 | Green | Off | Data is not being received |
LED5 | Green | Blinking | Data is being transmitted |
LED5 | Green | Off | Data is not being transmitted |
LED6 | Green | On | Power is on |
LED6 | Green | Off | Power is off |
My Books
