SPEEDLINK/PC16 (VER.2) Network Card Settings and Configuration

NIC Type	Ethernet
Network Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear Bus
Wiring Type	AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial
Boot ROM	Not available

CONNECTIONS
Function	Label	Function	Label
AUI transceiver via DB-15 port	CN1	RG-58A/U 50ohm coaxial port	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Normal performance selected	J1	Open
	High speed performance selected	J1	Closed

BASE I/O ADDRESS SELECTION
Address		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6
»	0360h	On	Off	Off	On	Off	Off
	0320h	On	Off	On	On	Off	Off
	0330h	Off	Off	On	On	Off	Off
	0340h	On	On	Off	On	Off	Off
	0350h	Off	On	Off	On	Off	Off
	0380h	On	On	On	Off	Off	Off
	0390h	Off	On	On	Off	Off	Off
	03A0h	On	Off	On	Off	Off	Off

INTERRUPT SELECTION
IRQ		J9	J10	J11	J12	J12	J14	J15	J16
»	2/9	Closed	Open	Open	Open	Open	Open	Open	Open
	3	Open	Closed	Open	Open	Open	Open	Open	Open
	4	Open	Open	Closed	Open	Open	Open	Open	Open
	5	Open	Open	Open	Closed	Open	Open	Open	Open
	7	Open	Open	Open	Open	Closed	Open	Open	Open
	11	Open	Open	Open	Open	Open	Closed	Open	Open
	12	Open	Open	Open	Open	Open	Open	Closed	Open
	15	Open	Open	Open	Open	Open	Open	Open	Closed

CABLE TYPE SELECTION
Type		J17	J18	J19
»	RG-58A/U 50ohm coaxial	Closed	Closed	Closed
	AUI transceiver via DB-15 port	Open	Open	Open

ROM ADDRESS SELECTION
Address		SW1/7	SW1/8	SW1/9	SW1/10
	None	Off	Off	Off	Off
	C000	On	On	On	On
	C400	On	Off	On	On
»	C800	On	On	Off	On
	CC00	On	Off	Off	On
	D000	On	On	On	Off
	D400	On	Off	On	Off
	D800	On	On	Off	Off
	DC00	On	Off	Off	Off